Home
Hackers Help

Hackers Help: Looking for Leirvik bed part

Contributor·
Hackers Help
·35 Comments·1 min read

I am searching for two sleeve nuts (pt. # 100585) for an older Leirvik bed frame. I don’t know when, but at some point in time IKEA changed the way this bed is assembled and they do not carry the part # anymore (not even in the bins).

Looking for Leirvik bed part

I have searched Amazon, eBay, swedishfurnitureparts.com, and googled it for days with no luck. I do know that it is M6 10×26. Can anyone point me in the right direction?

~ by Kathy

Related: Leivrik bed with night lights

 

Previous Article17 Secrets IKEA Employees Won’t Tell You
Next ArticleExtendable Board Game Table made from IKEA TV stands

35 Responses

  1. I am after 100017 and 100585 but the ikea store says that the model is discontinued. Can you help? Thanks

    Reply

    1. Hello MALA try this link. The top of the heads can use as replacement
      PGMJ 40 Pieces M6 Binding Screws Posts Rivet Socket Cap Connecting M6 Bolts Cap Nuts Assortment Kit for Baby Bed Furniture,Leather Saddles Purses Belt Repair,Scrapbook Photo Albums Binding (M6x50mm-D)

      Reply

  2. I had the same problem with a bed I purchased second hand, it was missing one bolt- I found the number of the spare part on the assembly details on IKEA website. Ordered them through IKEA free and delivered free too. Great service!

    Reply

  4. Hi guys you can use part number 106498 which is a slightly shorter hex nut.
    I got some in September 2019 from my local branch.
    Or you could buy second hand frame for parts.
    Hope that helps.

    Reply

  5. Hello I am looking for the legs the the leirvik bed, also did anyone find out what screw or bolt will work for the beam? Any help will be greatful

    Reply

  6. So we needed 4 of these as we managed to lose them in the two weeks the bed was removed while we painted. actually found suitable replacement in local wilko 4 large bolts which fit perfectly we have just not completely tightened so that we can remove in future but will look at adding a washer to ensure we can remove in future.

    Reply

  8. I need the four legs for this bed. Does anyone know where to get them? Ikea says I need the buy the entire frame top and bottom

    Reply

  9. My local IKEA ordered some for me, I believe it had a slightly different part number and was a touch longer or shorter, and it came from overseas but was surprisingly fast. I’d stripped it moving the bed for the 9th time. Gonna be more careful in future, the frame is otherwise rock solid.

    Reply

    1. Do you have the part number by chance? In the past, I was able to make the pieces from stuff I got from Lowe’s, but they ended up being too big and now that I have moved I am missing all the nuts and screws.

      Reply

  10. IKEA comes with lots of new inventions all the time. generally products tend to lose their sale (life cycle ) in 2-3 years with competition and cost cutting . In order to be ahead with the trend it need to continuously improve its product life cycle as well as sales numbers. When you generally procure items that may be having an useful life of 2-3 years, better to consider buying extra bolts, rivets, screws, clamps and nuts so that you don’t have to discard the whole product for the sake of a single small item. I can see some useful tips (above) from IKEA on the introduction of screws that are of the same thread but different length. Better to get few of them and trim their length (a local lathe company can do this for you) so that you need not run around next time.

    Best wishes
    SG Associates Builders & Developers
    sgakumbakonam.in

    Reply

  11. Hello, I too am in the same situation. I was able to get the screw (pt 100017) from IKEA, but the nut sleeve is discontinued and they do not have any in stock (pt 100585). I looked up the ART 9070 m6x25 (m6x30) screw + the screw DIN 913 m6x10 parts, but the sleeve is only overseas. Does anyone else know of another alternative?

    Reply

    1. Hej Moriah,

      This is not something I could find. However, your customer support center can contact IKEA Components through the spare parts order tool. They have experts that are better when it comes to the details and they always try to help if they can. It would be good to specify the product’s 8 digit article number if you still have that. Good luck! 🙂

      Reply

  12. My daughter is getting rid of her IKEA Frame. Can you send me an actual pic of this part. I may have them to give you.

    Reply

    1. Thank you Nicky, for your kind offer. I don’t have a picture of the part but if you look at the line drawing above it’s the one that has the number 1 0 0 5 8 5 underneath it. If that’s the part that you have I would gladly pay for shipping, thank you!

      Reply

        1. Yes, I do! But I don’t have a way to see your email address. Sorry for the delay responding lots of family stuff happening!

          Reply

    2. Hi Nicky. Did your daughter have the full size Leirvek? We need side rails. Thanks. Rachel in Michigan

      Reply

    3. Dear Nicky: Does your daughter still have the bed? I need the legs under the frame. I lost them during the move from my previous home. thanks so much

      Reply

  13. Hello
    standard fasteners
    ART 9070 m6x25 (m6x30) screw + the screw DIN 913 m6x10 = pt. # 100585 ;))
    you will need another wrench from the Bicycle kit, IKEA key to DIN 913 m6x10 is not suitable

    Reply

  14. Hi,

    This version of the bed was discontinued in 2014, and 3 years later, in 2017 it was discontinued as after sales.

    There is one version of the nut that is longer, and one that is shorter. After consulting the EQR team at IKEA Components, we think it would be safe to replace the 26mm version with either a 23mm version or a 30 mm version. It will not be very visual appealing however because of the size difference, but should be safe at least.

    119036 NUT SLEEVE C M6 ø10×23 TF S5 or 148534 NUT SLEEVE C M6 ø10×30 TF S5

    Reply

    1. Thank you, Bart! Sounds like you have the answer for me–it’s nice to know that Ikea reads Jules blog and responds! It makes me love Ikea even more!

      Reply

  15. I have this bed and was slowly losing the bolts. Turns out many of the lost ones had falling INTO the bed frame but hadn’t fallen back out because of the plastic feet on the bottom of the bed legs. Try pulling off the feet and seeing if any fall out. I found two that way!

    Reply

  16. can you use the ones you have on the foot and buy bolts at the hardware store with same thread diameter and length – and then a felt pad to protect your wall

    Reply

  17. Have you tried calling IKEA? I once lost a small connector for a mirror they no longer sell and they sent me the part for free.

    Reply

    1. This part, sleeve nut (pt. # 100585) for Leirvik, is no longer in stock. Not even as a spare part. I took time to ask about it in the IKEA department store in Stockholm, Sweden.
      /Greetings from IKEA land

      Reply

        1. Hi Kathy, what was the ending solution?

          I’m in the same predicament right now, I have two of the bolts to put the sides of the bed together but need two more but don’t know where to look.

          Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.