Part of Jessica’s Reading Room transformation for the One Room Challenge includes a Tarva Dresser hack. Right up our alley.
Her inspiration piece is this classy unit from West Elm, called Gemini. The distinctive feature of the Gemini unit are the routed circular overlays. They function as a design detail as well as drawer pulls.
It costs $699. On the other hand, the TARVA a mere $149. So a hack was in order.
- IKEA TARVA 5-drawer chest
- 1×3′ lumber – 2 at 8′ each
- Titebond wood glue
Tarva dresser hack instructions:
First things first, Jessica assembled the dresser.
She filled up the predrilled holes on the drawer fronts for knobs, as she’ll be creating her own set of pulls.
To make the drawer pulls in the same style as the West Elm ones, she first measured the width of the TARVA drawers. Then, decided how long she wanted each pull.
She bought (2) 8ft 1×3’s and cut them down to 22 1/2″ long. She made 8 of these.
For her pulls, she went with a 45 degree angle (instead of rounded) which is easier to cut and route.
Next, she bought a chamfer router bit to create the routed edges, like the West Elm overlays.
With all the pieces finished, she applied some Titebond wood glue on the backs of the pulls and clamp them onto the drawer fronts. Measure the centre of the drawers and the centre of the handles for a guide.
The top drawer and the bottom drawer get one pull, the centre drawers get two. One at the top and one at the bottom.
After letting the glue cure for a few hours, the West Elm inspired TARVA dresser hack is done.
At the moment, it still needs a coat of stain, which Jessica hasn’t decided on.
Follow Jessica on HouseHomemade and see her complete the One Room Challenge.